Meatest 9010 Multifunction Calibrator
- Voltage range: DC: 0 - 1050 V | AC: 1 mV - 1050 V
- Current range: DC: 0 - 20.5 A | AC: 10 µA - 20.5 A
- Frequency range: 15 Hz - 400 MHz
- Resistance range: 0 Ω - 1.1 GΩ (2W)
- Capacitance range: 0.8 nF - 120 mF
- Power output: 40 µW - 5.74 kW
- Temperature calibration: RTDs (Pt3850, Pt3916, Ni120, custom), thermocouples (B, C, D, E, J, K, N, R, S, T)
- Interfaces: RS232, LAN, USB, GPIB
The Meatest 9010 is an advanced multifunction calibrator designed as an all-in-one solution for calibration laboratories and industrial applications. This powerful instrument supports a wide range of measurements, including AC/DC voltage and current, power, energy, resistance, capacitance, frequency, thermocouples (TC) and RTDs. With a basic accuracy of 35 ppm and extensive measurement capability, the 9010 is suitable for the most demanding calibration scenarios.
Extensive measurement and calibration capabilities with the Meatest 9010
The Meatest 9010 is designed to calibrate a wide range of measuring instruments, including multimeters, clamp meters, ohmmeters, power meters, energy meters, transducers, insulation testers and oscilloscopes. The calibrator can generate voltages up to 1050 V, currents up to 20.5 A, and frequencies up to 400 MHz, supporting both low- and high-frequency applications.
The built-in harmonic and non-harmonic waveform generator allows users to perform tests with different crest factors and distorted signals, essential for evaluating the signal sensitivity of measuring equipment.
High performance and flexibility
With a maximum output load of 50 mA for voltage and 20.5 A for current, the 9010 provides sufficient capacity to calibrate analogue meters and power meters with relatively low input impedance as well. The addition of a 1.5 kV high-voltage resistor option allows calibration of insulation testers, which is a valuable expansion over previous models.
The calibrator features a built-in process multimeter, which can be used to test external transducers and sensors, such as strain gauge sensors, pressure sensors, torsion sensors and force sensors. Automatic uncertainty calculation and remote control functionality ensure a more efficient and accurate calibration process.
User-friendly operation and connectivity
The Meatest 9010 is fully compatible with Meatest CALIBER and/or WinQbase software, allowing users to perform automated calibrations and easily record and analyse measurement data. The device offers various communication options, including RS232, USB, LAN and GPIB, for seamless integration into automated test systems.
With a short warm-up time of 30 minutes, the 9010 is quickly operational, while its robust housing and stable temperature characteristics ensure instrument reliability and lifetime.
Applications Meatest 9010
The Meatest 9010 is suitable for a variety of calibration applications, including:
> Multimeter and clamp meter calibration
> Power and energy meter testing
> Oscilloscope and frequency tester calibration up to 400 MHz
> Transducer and sensor calibration
> Insulation tester calibration up to 1.5 kV
The Meatest 9010 Multifunction Calibrator is the choice for professionals looking for a reliable, versatile and accurate calibration solution. Contact us for more information or a customised quotation.
