Meatest M550 impedance calibrator
- Resistance standards from 0.1 Ω to 100 MΩ
- Capacitance standards from 10 pF to 100 μF
- Simulated inductance standards from 10 μH to 10 H
- Four pair coaxial terminal connection, four terminal connection, two terminal connection
- Calibration data from 20 Hz to 1 MHz
The Meatest M550 is an advanced impedance calibrator designed for the accurate calibration of LCR meters and impedance analysers. With a frequency range of 20 Hz to 1 MHz, support for four-terminal pair (4TP), four-wire (4W) and two-wire (2W) measurement configurations, and features such as open, short and load compensation, the M550 offers a complete and reliable solution for laboratories and calibration environments.
Precisie en stabiliteit voor LCR-meter kalibratie
De M550 bevat stabiele en temperatuur-onafhankelijke weerstand-, capaciteits- en inductiestandaarden, die worden gesimuleerd met een passief RC T-netwerk. De aanwezigheid van open en short referentieposities elimineert ongewenste invloeden van testkabels, wat resulteert in uiterst nauwkeurige metingen.
De ingebouwde signaalmeter geeft real-time meetwaarden weer op een groot LCD-scherm, inclusief spanning, stroom en frequentie. Dit maakt de M550 niet alleen geschikt voor handmatige kalibratie, maar ook voor volledige automatisering via RS-232 en GPIB interfaces, ondersteund door de Meatest CALIBER/WinQbase software.
Wide measurement range and high accuracy
The M550 supports a wide range of impedance parameters and measurement modes:
> Resistivity: 0.1 Ω – 100 MΩ (4TP & 4W), 1 Ω – 10 MΩ (2W)
> Capacitance: 10 pF – 100 µF (4TP), 100 pF – 100 µF (other modes)
> Inductance: 10 µH – 10 H (4TP), simulated via T-network
> Frequency range: 20 Hz – 1 MHz
Thanks to accurate temperature compensation (2-50 ppm/K depending on range) and annual stability of 0.01%, the M550 remains reliable for long-term use.
Comprehensive testing and analysis capabilities
With the ability to display parameters in complex pairs (Z/θ, Y/θ, Rs/Ls, Rp/Cp, etc.), the M550 provides in-depth analysis for:
> Component test and quality control of impedance devices
> Calibration of LCR meters, impedance analysers and network components
> Materials testing and dielectric analysis
> Electronic circuit research and development
User-friendly operation and connectivity
The M550 is designed for easy integration and ease of use:
> Large LCD display for instant display of measured values and settings
> Automated calibration via RS-232 and IEEE488 (GPIB)
> Support for open, short and load compensation for elimination of measurement errors
> Short warm-up time of only 15 minutes for fast and efficient measurements
Technical specifications
> Resistance range: 0.1 Ω – 100 MΩ (4TP & 4W), 1 Ω – 10 MΩ (2W)
> Capacitance range: 10 pF – 100 µF (4TP), 100 pF – 100 µF (other modes)
> Inductance range: 10 µH – 10 H (4TP, simulated)
> Frequency range: 20 Hz – 1 MHz
> Test level meter:
– Frequency measurement: 20 Hz – 100 kHz (accuracy: 0.01% + 1 mHz)
– Voltage measurement: 0.2 – 10 Vrms (accuracy: 2% above 1V, 5% otherwise)
– Current indication: 1 nA – 500 mA
> Power supply: 115/230V, 50/60 Hz, 35 VA max
> Interfaces: RS232, IEEE488 (GPIB)
The Meatest M550 Impedance Calibrator is the choice for professionals looking for a reliable, accurate and versatile solution for impedance calibration. Contact us for more information or a customised quote.
